Pneumatic Actuated BALL VALVES
Good Supplier presents the Pneumatic Actuated Ball Valves, which are used to control the flow of liquids and gases remotely.
A Pneumatic Actuated Ball Valve uses compressed air to automate the control of media. Pneumatic Actuated Ball Valves don’t rely on a motor, but they do require electricity when paired with an integral pilot or solenoid valve.
By using an actuator, you can control your ball valve remotely or through a controller so that it can be used as an automatic ball valve shut off. This has a great benefit.
Because the valve can be controlled in the control room, there is no need to go to the scene or high altitude and dangerously bring manual control, which greatly saves human resources, time, and safety.
Here’s a breakdown of the 3 components:
• Pneumatic: Refers to the use of pressurized air or gas to create energy.
• Actuator: The component that is used to automate control of the ball valve.
• Ball Valve: A quarter-turn on/off valve that controls the flow of media via a pivoting ball
Designed for high cycling, Pneumatic Actuated Ball Valves offers exceptional service life in a compact, low-cost package. These ball valves feature a superior valve-to- actuator mounting system and space-saving design.
Features & Benefits
⦿ A spring actuated ball valve, also called spring- loaded ball valves, uses a spring to open/close the valve in a power-off scenario and an actuator to then hold it in the open/close position. These are used for energy conservation applications or fail-safe reasons.
⦿ Double-acting valves use air to open and air to close the valve. Advantages of Air Actuated Ball Valves over other type valves may include:
Higher flow rates; Higher pressures; Higher temperatures; Wider media compatibility; Straight through flow path; Reduced water hammer and use in hazardous environments.
Also, since materials such as polytetrafluoroethylene have good self-lubricating properties and small friction loss with the ball, the pneumatic ball valve has a long service life.
Available in both Spring Return & Double Acting units setup can be arranged in either the fail-safe open or closed positions, returning the actuator and valve position to the required safety location in the event of a power failure.
Designed for high cycling, Pneumatic Actuated Ball Valves offers exceptional service life in a compact, low-cost package. These ball valves feature a superior valve-to- actuator mounting system and space-saving design.
Get in contact with us NOW to have the best quality of good and reliable parts for the choke and industrial valves in the industry! The only place where HIGH QUALITY and SPEED OF DELIVERY meets LOWER PRICES!